Manufacturing Capability
Stable production for recurring B2B orders and flexible supply requirements.
- Bulk production
- Flexible specifications
- Repeat-order support

Network Cable Manufacturer & Exporter
Custom OEM / ODM network connectivity with flexible MOQs, tested quality, and export-ready packaging
ISO 9001 · CE · RoHSFluke Tested · 24h Quote Response
We supply bulk network cable and pre-terminated patch cords straight from our own factory. Bulk cable covers Cat5e–Cat7 indoor and outdoor constructions for installation projects; patch cords are assembled and tested for fast, reliable connectivity.
We are a manufacturing and export partner for distributors, contractors and system integrators that need consistent network cable supply. In practice that means stable specifications, documented quality control and OEM support across repeat orders.
Stable production for recurring B2B orders and flexible supply requirements.
Controlled from material inspection through finished-product testing.
Customize specifications, branding and packaging for your market.
Prepared for international orders with export packaging and documentation.
The four most requested bulk network cable categories are Cat5e, Cat6, Cat6a and Cat7. They differ mainly in bandwidth (100 MHz to 600 MHz), shielding options and conductor construction — compare them below against what your project actually requires.
| Category | Bandwidth | Shielding | Conductor | Typical use | Best For |
|---|---|---|---|---|---|
| Cat5e | 100 MHz · up to 1 Gbps | UTP | 24 AWG | Office LAN, voice & data, cost-effective general cabling | Cost-sensitive projects |
| Cat6 | 250 MHz · up to 1 Gbps (10 Gbps to ~55 m) | UTP / F/UTP | 23 AWG | Enterprise LAN, Gigabit networks, standard structured cabling | General structured cabling |
| Cat6A | 500 MHz · 10 Gbps up to 100 m | UTP / F/UTP / S/FTP | 23 AWG | Data centers, high-bandwidth backbone, PoE+ installations | 10G infrastructure |
| Cat7 | 600 MHz · 10 Gbps | S/FTP (fully shielded) | 23 AWG | Data centers, industrial Ethernet, EMI-sensitive environments | EMI-sensitive environments |
UTP = unshielded twisted pair · F/UTP = foil-screened pairs · S/FTP = braid + foil-screened pairs. Typical values shown; exact specifications vary by construction and supplier.
Cable choice follows the application: data centre backbones, office LANs, CCTV runs and outdoor routes each call for a different construction. We supply bulk cable and patch cords matched to the way you deploy them.
We manufacture cable to your specification, then brand and pack it for your market. Custom construction, jacket printing, colors, compliance documents and packaging are handled on the same production run.
These guides answer the questions buyers ask most often: which category to order, how shielding affects performance, and what to check before accepting a shipment. They are written for procurement and engineering teams.

Cat6 and Cat6A both carry 1 Gbps to 100 m, so the decision turns on 10GBASE-T distance, shielding and PoE. Cat6 reaches 10GBASE-T over roughly 37 to 55 m depending on crosstalk; Cat6A is specified to 100 m. This guide compares both on performance, installation and installed cost.
Read guideInstallation
Aerial, duct and direct-burial runs load an outdoor cable differently. Sunlight, standing water, soil contact and span tension each call for a different jacket, armour or messenger. This article compares the three constructions and the site conditions that decide which one holds up.
Read guideProduct Knowledge
There is no separate PoE cable type. Power runs on ordinary twisted-pair, and what decides whether a link carries it is conductor size, pair count, bundle heat and connector rating. This article sets out the 802.3af, at and bt power levels and the cable properties that matter at each one.
Read guideSend your specification, target price or sample request and our export team replies within 24 hours with pricing, lead time and available options.